Furnace chamber solution

Tube Furnace Chambers

Split and cylindrical heated chamber assemblies defined by process tube, heated length, zones, element layout and terminal interface.

Request a Technical Quote Review Configuration

Product configuration

Configuration overview

Application fit: Tube furnace replacement, multi-zone heating and OEM heated-section integration.
Temperature / cycle: Defined by the selected configuration and required working cycle. Working and maximum values must be confirmed separately.
Geometry: Process-tube outside diameter, chamber bore, heated length, split geometry and enclosure fit are required.
Atmosphere boundary: Air or a qualified controlled-environment arrangement, depending on the equipment and sealing boundary.
Heating / connection: Element material, zone length, lead-out direction, terminal position and electrical target depend on the furnace design.

Start with the tube and heated length

A tube furnace chamber must fit the process tube, deliver the required heated zone and integrate with the enclosure, insulation, terminals and control system. Split construction may support installation around an existing tube, while other configurations are qualified around the furnace architecture.

TubeMaterial, outside diameter, wall and operating orientation.

ZoneTotal heated length, number of zones and temperature profile objective.

OpeningsSplit line, ports, thermocouple route and end insulation.

ElectricalSupply, resistance or power target, terminals and controller interface.

Replacement measurement checklist

Process-tube outside diameter and required clearance
Overall chamber and heated-zone lengths
Outside dimensions and enclosure interface
Split orientation, hinge or fastening arrangement
Element and terminal photographs
Available drawings and electrical data

Configuration overview

Start with the tube and heated length

Replacement measurement checklist

Prepare the next specification step.